| タイトル | 掲載誌名など |
|---|---|
| Compatibility of Li7La3Zr2O12 Solid Electrolyte to All-Solid-State Battery Using Li Metal Anode | J Electrochem Soc 157(10), A1076-A1079, 2010 |
| Coherent Quenching of a Fluorophore for the Design of a Highly Sensitive In-Stem Molecular Beacon | Angew Chem Int Ed 49(32), 5502-5506, 2010 |
| InAlN/GaN HEMT Structures on 4-in Silicon Grown by MOCVD | 電子情報通信学会技術研究報告 110(SDM2010 49-123), 241-244, 2010 |
| Improved emission of ferroelectric electron emitter by surface treatments in gas atmosphere | J Appl Phys 107(11), 114109, 2010 |
| Study on Production of CH4 in Hydrogen Purification with Palladium-Silver/Ceramic Composite Membranes | Ind Eng Chem Res 49(9), 4377-4382, 2010 |
| Compatibility of LiCoO2 and LiMn2O4 cathode materials for Li0.55La0.35TiO3 electrolyte to fabricate all-solid-state lithium battery | J Power Sources 195(17), 5784-5788, 2010 |
| Fabrication of Three-Dimensional Battery Using Ceramic Electrolyte with Honeycomb Structure by Sol-Gel Process | J Electrochem Soc 157(4), A493-A498, 2010 |
| Demonstration of AlGaN-Based Deep-Ultraviolet Light-Emitting Diodes on High-Quality AlN Templates | Jpn J Appl Phys 49(2) Issue 1, 022102.1-0022102.4, 2010 |
| A Probe Containing Two Base-discriminating Fluorescent (BDF) Nucleosides for SNP Typing | Chem Lett 39(2), 116-117, 2010 |
| Vibration of a Water Droplet on a Polymeric Insulating Material Subjected to AC Voltage Stress | NGK Rev Overseas Ed 33, 36-41, 2010 |
| Contamination flashover characteristics of polymer insulator under various kinds of test conditions | NGK Rev Overseas Ed 33, 32-35, 2010 |
| Accelerated Ageing Characteristics of Polymer Insulators under DC Voltage Application | NGK Rev Overseas Ed 33, 28-31, 2010 |
| Study on Reduction of Contamination Accumulation by Coating on Insulator Surface | NGK Rev Overseas Ed 33, 24-27, 2010 |
| Evaluation Methods of Contamination Flashover Voltage Performance of Cylindrical Type Semi-conducting Glaze Porcelain Insulators | NGK Rev Overseas Ed 33, 19-23, 2010 |
| Specific Considerations on IEC Standardization of Externally Gapped Line Surge Arresters (EGLAs) | NGK Rev Overseas Ed 33, 13-18, 2010 |
| Rating and Requirements for Externally Gapped Line Surge Arrester (EGLA) | NGK Rev Overseas Ed 33, 7-12, 2010 |
| Verification Tests for Externally Gapped Line Surge Arrester (EGLA) | NGK Rev Overseas Ed 33, 1-6, 2010 |
| Contamination flashover characteristics of polymer insulator under various kinds of test conditions | 電気学会放電研究会資料 ED-10(60-73.75.77-78.80-81.83-92.95.97.99.101), 101-104, 2010 |
| Specific Considerations on IEC Standardization of Externally Gapped Line Surge Arresters (EGLAs) | 電気学会論文誌 B 130(9), 833-838, 2010 |
| Very Lean and Diluted SI Combustion Using a Novel Ignition System with Repetitive Pulse Discharges | SAE Int J Engines 2(2), 749-755, 2010 |
| Numerical simulation of microstructure formation of suspended particles in magnetorheological fluids | J Phys Condens Matter 22(32), 324103,1-7, 2010 |
| Manufacturing of Neutron Reflector Frame for JMTR | 日本原子力研究開発機構JAEA-Technology-2009-078 , 22P, 2010 |
| Vibration of a Water Droplet on a Polymeric Insulating Material Subjected to AC Voltage Stress | IEEE Trans Dielectr Electr Insul 17(2), 566-571, 2010 |
| Plasma Disinfection and the Deterioration of Surgical Tools at Atmospheric Pressure Plasma | 電気学会論文誌 A 130(4), 355-361, 2010 |
| The Creative, Originative, and Useful Progress of Surge Arresters and Insulation Coordination for AC 66-1100kV Power Systems Described in the IEEJ Technical Report No. 1132 | IEEJ Trans Electr Electron Eng 5(1), 46-55, 2010 |
| Fabrication of rigid media tube filter bound with aluminum borate using Al2O3-B2O3-MgO frit for filtration of molten aluminum | Ceram Int 36(3), 863-870, 2010 |
| Evaluation Methods of Contamination Flashover Voltage Performance of Cylindrical Type Semi-conducting Glaze Porcelain Insulators | 電気学会論文誌 B 130(2), 197-202, 2010 |
| Performance verification of next generation diesel particulate filter | Soc. Automot. Eng. Volume: SP-2287 Number: Diesel Exhaust Emission Control Pages: 97-105, 2010 |
| Theoretical analysis of temperature of substrate inserted between parallel plates based on radiation heat transfer model | J. Therm. Sci. Technol. 5(2), 303-318, 2010 |
| 長期追跡健康診断データにおける遺伝･環境要因を用いた生活習慣病リスク決定法 | 生物工学会誌 88(11), 562-569, 2010 |
| 流路内蔵セルおよびスタックの開発 | Fine Ceram Rep 28(3), 112-114, 2010 |
| LTCC(低温同時焼成セラミックス)技術 LTCC異種材料接合技術の進歩 | セラミックス 45(5), 379-382, 2010 |
| 水系懸濁液を用いた単層および複層アルミナ質ろ過材のろ過性能評価 | 軽金属 60(10), 505-510 , 2010 |
| プレス加工によるアルミ缶蓋の成形過程最適化に関する研究 | 日本機械学会論文集 C編 76(771), 2839-2846, 2010 |
| セラミックス多孔体 排気ガス浄化用セラミックス担体 | セラミックス 45(10), 805-809, 2010 |
| セラミックス多孔体 セラミックフィルターの応用と今後の展開 | セラミックス 45(10), 796-800, 2010 |
| ろ過材へのアルミニウム溶湯の含浸性に及ぼすろ過槽内流れの影響 | 軽金属 60(7), 321-326, 2010 |
| メカライフ 綺麗にする ディーゼルエンジンの排気ガスを綺麗にするセラミックス | 日本機械学会誌 113(1102), 726-727, 2010 |
| プラズマ滅菌･殺菌 4 プラズマ発生ガスの相違による滅菌効果の違い | 防菌防ばい 38(9), 597-608, 2010 |
| 平行面間に挿入された薄板の温度に関する輻射伝熱モデルによる考察 | 日本機械学会論文集 B編 76(768), 1248-1257, 2010 |
| 日本ガイシ:NAS電池の展開 内外のニーズに合わせ導入拡大 | エネルギーレビュー 30(9), 16-18, 2010 |
| 強歪み伸線加工したCu-Zr二元系合金線材の組織,および電気的･機械的性質 | 銅と銅合金 49, 67-72, 2010 |
| 光関連材料･デバイス | 照明学会誌 94(8B), 495-504, 2010 |
| Be ベリリウム | 工業レアメタル (126), 52-53,56, 2010 |
| ほう酸アルミニウムで結合したアルミニウム溶湯用アルミナ質ろ過材へのシリカ添加効果 | 軽金属 60(2), 55-60, 2010 |
| 環境とセラミックス 内燃機関の排ガス浄化に関するセラミックス | Fine Ceram Rep 28(1), 7-11, 2010 |
